Remodel and repair costs in Glenn County, California

Budgets for 15 common projects, priced at the hourly rates contractors bill in Glenn County, with local sales tax (7.25% to 8.75%) and permit fees. Example ZIP: 95963 (Orland).

Estimate my project in Glenn County Contractor rates by trade

Budget estimate, not a bid, appraisal, or insurance claim valuation. Get licensed contractor bids. Pilot.

Glenn County at a glance

Glenn County had 28,917 residents in the 2020 Census across 1,314 square miles; the largest places are Orland, Willows and Hamilton City. Across 15 projects, a typical Glenn County budget is 2% below the median California county, the 13th lowest of 58 counties. A mid-finish kitchen remodel here comes to about $47,000, the 11th lowest of 58.

What projects cost in Glenn County

Typical size for each project (see each cost guide for the details), ZIP 95963. Likely is the median of 4,000 simulated outcomes; the range is the 10th to 90th percentile. "Vs. state" compares the mid likely budget with the median of all 58 California counties. Basic assumes the lower-cost starting choices, for example laminate counters, an acrylic tub wall set and pressure-treated wood decking.

Project	Basic	Mid (likely)	Mid range	Premium	Vs. state
Kitchen remodel · estimate	$38,400	$47,000	$40,000–$55,900	$65,300	−3%
Kitchen refresh · estimate	$12,200	$15,100	$13,000–$17,800	$17,500	−3%
Bathroom remodel · estimate	$18,200	$22,000	$18,000–$27,200	$27,000	−4%
Roof replacement · estimate	$12,600	$12,700	$11,000–$14,700	$13,000	same
New flooring · estimate	$7,100	$8,400	$7,200–$10,100	$8,500	−1%
Interior painting · estimate	$8,200	$9,000	$7,600–$10,800	$9,000	−3%
Exterior painting · estimate	$5,700	$5,700	$4,500–$7,100	$5,900	−3%
New deck · estimate	$15,500	$17,700	$15,000–$20,900	$23,100	−3%
Window replacement · estimate	$7,900	$8,500	$7,400–$9,800	$13,200	+1%
Siding replacement · estimate	$22,400	$22,300	$19,000–$26,300	$22,300	−2%
ADU or room addition · estimate	$207k	$219k	$186k–$259k	$241k	−2%
Bedroom or living room refresh · estimate	$5,400	$6,000	$5,000–$7,100	$6,200	−2%
Garage door replacement · estimate	$3,000	$4,400	$4,000–$4,900	$5,800	same
Front entry door · estimate	$1,500	$2,300	$2,000–$2,600	$3,400	same
Heating and air conditioning · estimate	$12,300	$14,400	$12,900–$16,500	$16,200	−6%

Contractor hourly rates in Glenn County

What a contractor bills per hour for each trade, built from the North Valley-Northern Mountains Region of California nonmetropolitan area wage data (BLS, May 2025), payroll taxes, California workers' comp rates for that trade, and contractor overhead and profit. Not wages.

Trade	Low	Likely	High	Vs. state
Carpenter	$75	$96	$122	−2%
Construction laborer	$53	$74	$93	−1%
Electrician	$91	$116	$172	−5%
Plumber	$97	$115	$189	−9%
Painter	$58	$78	$94	−1%
Roofer	$70	$90	$111	same
Tile and stone setter	$54	$75	$113	same
Floor layer	$54	$85	$137	same
Drywall installer	$64	$86	$134	same
Cement mason	$55	$80	$115	−2%
Glazier	$67	$90	$135	+1%
HVAC mechanic	$82	$104	$172	−16%

What drives costs here

Labor: billed rates in Glenn County are 1% below the median California county (the 21st lowest of 58). Wage data: BLS wage data for the North Valley-Northern Mountains Region of California nonmetropolitan area (shared with Colusa County, Tehama County, Nevada County, Plumas County, Sierra County, Lassen County, Modoc County, Siskiyou County and Trinity County). The highest-billing trades are electrician ($116/hr) and plumber ($115/hr).
Sales tax: 7.25% to 8.75%, depending on the city on materials (CDTFA, effective October 1, 2026).
Permits: estimated from each job's valuation; kitchen and bathroom remodels usually need one, painting usually does not.
Mountain factor: none of this county's ZIP codes get one.
Contractor overhead and profit: a separate 10% + 10% line only on jobs with three or more trades; single-trade jobs are priced at the trade's billed rate. No markup on materials.

Open the estimator for ZIP 95963, or enter any of the 7 Glenn County ZIP codes. Method and sources.

Questions

How much does a kitchen remodel cost in Glenn County?

For a 150 sq ft kitchen with 20 ft of base cabinets and new cabinets, counters, floor, lighting and appliances, our likely budget in ZIP 95963 (Orland) is $47,000 at mid finish, with a range of $40,000 to $55,900. Basic finishes come to about $38,400 and premium to about $65,300. That is the 11th lowest of California's 58 counties.

What does a bathroom remodel or a new roof cost in Glenn County?

A 45 sq ft full bathroom remodel is about $22,000 at mid finish ($18,000 to $27,200). A 2,000 sq ft asphalt shingle roof replacement with tear-off is about $12,700, and replacing a central AC and gas furnace is about $14,400.

What do contractors charge per hour in Glenn County?

Our model prices each trade at the rate a contractor bills, not the worker's wage, using BLS wage data for the North Valley-Northern Mountains Region of California nonmetropolitan area (shared with Colusa County, Tehama County, Nevada County, Plumas County, Sierra County, Lassen County, Modoc County, Siskiyou County and Trinity County). The likely billed rate runs from about $74 an hour (construction laborer) to about $116 (electrician), and the typical trade bills 1% below the median California county, the 21st lowest of 58.

Are remodels more expensive in Glenn County than elsewhere in California?

The typical project budget here is 2% below the median of all 58 California counties. The project furthest above the state median is window replacement (+1%); the one furthest below is heating and air conditioning (−6%). Sales tax on materials is 7.25% to 8.75%, depending on the city (CDTFA rates effective October 1, 2026).

Which Glenn County ZIP codes does the estimator cover?

All 7 of them, including 2 PO box and single-organization ZIP codes, which are priced the same as the area they serve. Enter any Glenn County ZIP in the estimator.

Is this a quote?

No. It is a budget estimate, not a bid, appraisal, or insurance claim valuation. Get written bids from licensed contractors, and check licenses with the Contractors State License Board.

More cost pages

Sacramento Valley and the North State: Butte County · Colusa County · Sacramento County · Shasta County · Sutter County · Tehama County · Yolo County · Yuba County · All 58 counties

Remodel Estimator is self-serve budgeting software from Caissonix, in pilot. Budget estimate, not a bid, appraisal, or insurance claim valuation. Figures computed 2026-10-29 from price book 2026-10-29.8; they change as prices and wages are updated. Population, land area and places: 2020 Census. Get licensed contractor bids, and check a contractor's license with the Contractors State License Board before you sign.